This device is designed for the liker in fishing. The device can be utilized in rivers, lakes, or sea.It Detects both equally fish location and fish dimension in both equally refreshing and salt drinking water, and can be utilized as a depth sounder.
one. Wireless (the host and the sensor are both equally wi-fi)
two. twenty-stage Sensitivity (superior detection accuracy)
three. Drinking water Temperature measurement exhibited in both °C or °F
four. Car & Handbook assortment assortment and .6-45M (two-148ft) depth assortment protection.
5. Coloration TFT Lcd Screen
Screen: Dot Matrix Lcd
Screen Sizing: 50x45mm
Screen Dot Selection : 320*240
Screen Contrast: ten~100%
Backlight: White LED Backlight
two. Sonar & Radio
Depth Variety: two-148Ft/.6-45M
Sonar Frequency: 125KHZ
Sonar Beam Angle: ninety diploma
Radio Frequency: two.4G
Operational Temperature: -twenty ~70℃
three. Electric power Supply:
Mainframe : Lithium battery four*AAA alkaline battery
Transducer: Polymer battery three.7V
one. A wi-fi remote sonar sensor
two. A handheld wi-fi acquiring host
three. A copy of User’s Tutorial
four. A cost cables for sonar sensor
5. A Neck strap
Wireless: No far more extended&major cable for transducer.Transmitter: The sonar sensor transmitter will switch on mechanically when you forged it into drinking water. You should dry it when not employing it, or the sensor will maintain operating.
Screen( Coloration TFT Lcd): Drinking water Depth, Temperature, Electric power Indicator, Simulation Method, Bottom Contour, Depth Variety, Depth Scale, Fish Icon (distinctive dimension).
No require to drill hole in your boat hull to put in the sensor any far more. Two modest holes on the wi-fi sensor enable you to tether with your fishing line and forged it onto drinking water as significantly as you want.
The device can try to remember prior to environment when you switch it off. Depth and Temperature units can be changed according to you require.
Be aware: one. It will switch off if depth exhibit reads “–” for 5 minutes for energy saving. two. You should enable quite a few seconds for the device to update the drinking water depth when you toss the transmitter onto drinking water. three. You could not see the color screen very easily in immediate daylight.